If your hot water ads send every searcher to one national page, you are paying for clicks from people who leave as soon as they see the wrong rebate. Someone in Ballarat searching for a hot water system rebate wants to know what Victoria will give them. A Sydney homeowner wants the NSW answer. Neither wants to read about a scheme that doesn’t apply to them.
The fix is structural, not clever copy. Build your Google Ads around the rebate the customer is already thinking about. That means separate campaigns per state, ad groups per scheme, and a landing page that talks about the same scheme the ad mentioned.
Below is the checklist we use when we rebuild hot water system replacement ads for plumbers who work across more than one state, or who work in one state and keep attracting interstate clicks.
Why a single national hot water campaign leaks money
Heat pump and solar hot water upgrades get help from more than one level of government. Small-scale technology certificates (STCs) under the federal Small-scale Renewable Energy Scheme apply to eligible systems across Australia. On top of that, some states run their own programs. Victoria has the Solar Homes Program through Solar Victoria and the Victorian Energy Upgrades (VEU) program. NSW has its energy savings incentives under the Energy Savings Scheme.
Homeowners know this, at least roughly. They search with the state and the scheme in mind: “solar homes hot water rebate”, “veu heat pump”, “heat pump hot water rebate nsw”. When one ad and one page try to answer all of those, the answer is vague for everyone. Vague answers don’t get phone calls.
There is a second problem. In Google Ads, location targeting is set at the campaign level, not the ad group level. So you can’t put a “Victoria” ad group and a “NSW” ad group in one national campaign and expect each to show only in its own state. If you want state-specific ads, you need state-specific campaigns first.
The hot water system rebate checklist for Google Ads
Work through each item. For each one we’ve written what good looks like and how to fix it if yours falls short.
Checklist
-
One campaign per state you service
What good looks like: Each state you work in has its own search campaign, with location targeting set to that state or the regions within it you actually cover. The location option is set to target people in or regularly in your locations, not people who are just interested in them.
How to fix it: Duplicate your existing hot water campaign, rename it by state, and change the location targeting. Then check the location options in the campaign settings. The "interested in" setting is how a Victorian ad ends up showing to someone in Queensland.
-
Ad groups split by scheme, not just by product
What good looks like: Inside the Victorian campaign you might have separate ad groups for Solar Homes heat pump searches, VEU heat pump searches, and solar hot water rebate searches. Inside the NSW campaign, an ad group for energy savings scheme searches and one for general heat pump rebate searches. Every campaign can have an ad group for STC or "government rebate" searches that don't name a state scheme.
How to fix it: Pull your search terms report for the last few months. Sort the terms by which scheme they mention. Each cluster with real volume becomes its own ad group.
-
Keywords that mirror how locals search
What good looks like: Phrase and exact match keywords that include the scheme name or state, such as "heat pump hot water rebate victoria" or "nsw hot water upgrade rebate". Broad keywords are only used if you have solid conversion tracking and negatives in place.
How to fix it: Move scheme-named terms out of generic ad groups and into the matching scheme ad group. Keep generic terms like "hot water system replacement" in their own ad group so you can see how they perform compared with rebate searches.
-
Negative keywords that block the other states
What good looks like: Your NSW campaign has negatives such as "victoria", "vic", "solar homes" and "veu". Your Victorian campaign has "nsw" and "new south wales" as negatives. Every campaign also blocks job seekers and DIY searchers with terms like "jobs", "apprentice", "course" and "diy".
How to fix it: Build a shared negative keyword list per state and apply it to every other state's campaign. That way a Victorian scheme search can't trigger your NSW ad even when someone is traveling.
-
Ad copy that names the scheme without promising a figure
What good looks like: Headlines that say the state and the scheme, such as "Solar Homes Heat Pump Installs" or "NSW Heat Pump Upgrade Rebate". Descriptions explain that you handle the paperwork or apply the discount at quote, if that's true for that scheme.
How to fix it: Remove dollar amounts from headlines. Rebate values and eligibility change, and a figure that's wrong for the customer's situation creates a bad first phone call. Also make sure no ad implies you are the government or the program itself. You are a plumber who installs eligible systems.
-
Accreditation claims that match reality
What good looks like: If a scheme only pays out when the job is done by an authorized retailer or accredited provider, your ads mention that status only if you hold it, worded the way the scheme words it.
How to fix it: Check your approvals for each scheme before you write the ad group. If you partner with an accredited provider rather than holding it yourself, say that plainly on the landing page.
-
Final URLs that point to the state page
What good looks like: Every ad group's final URL is the landing page for that state and scheme. No hot water ad points at your homepage or a general "services" page.
How to fix it: Build the pages first (see the landing page section below), then update the final URLs. Check each one loads fast on a phone. Our free Core Web Vitals checker will flag slow pages before you pay to send traffic to them.
-
Call and form tracking split by state
What good looks like: You can see how many calls and quote forms each state campaign produced, and ideally which ad group drove them. Calls from ads are tracked as conversions, and forms record which page they came from.
How to fix it: Set up call tracking and form conversions in Google Ads, and tag any non-Google links (email, social, flyers with QR codes) with UTMs so they don't muddy the numbers. The UTM link builder makes that quick. If tracking is a mess, our conversion tracking setup service is built for exactly this.
-
A review date for every scheme ad group
What good looks like: Each scheme ad group has a reminder to check the scheme's official site regularly. When a scheme pauses, closes or changes its rules, you update or pause the ad group the same week.
How to fix it: Put the review dates in a shared calendar. Note in the ad group name when you last checked it, such as "VIC - VEU heat pump - checked Nov".
Setting up the state ad groups, step by step
Here is the order we’d do it in if we were starting fresh in your account this week.
- List every state or region you install in, and the schemes that currently apply there. Use the official program websites, not a competitor’s page.
- Create one search campaign per state, with location targeting limited to the areas you service and the location option set to people in or regularly in those areas.
- Inside each campaign, create one ad group per scheme, plus one for general replacement searches and one for STC or “government rebate” searches.
- Add phrase and exact match keywords to each ad group, built from your own search terms report where you have one.
- Build and apply shared negative lists so each state campaign blocks the other states and their scheme names.
- Write responsive search ads that name the state and scheme in at least two headlines, with no dollar figures.
- Point each ad group’s final URL to its matching landing page, and add sitelinks to the other relevant pages for that state only.
- Turn on call and form conversion tracking, then let each campaign run long enough to collect real data before changing bids.
If you are unsure how to split budget across states, our Google Ads budget calculator gives you a sensible starting point per campaign.
Landing pages that match the scheme in the ad
The ad gets the click. The page gets the call. If the ad says “Victorian Solar Homes heat pump installs” and the page opens with a general paragraph about hot water, you’ve broken the promise in the first second.
A good scheme landing page does a few things in order:
- Repeats the scheme and state in the heading. “Heat pump hot water upgrades under the VEU program, Melbourne and regional Victoria.”
- Explains how the rebate works with you. Do you apply the discount at quote? Does the customer apply separately? Do you lodge the paperwork? Say it in plain words.
- Asks the eligibility questions up front. Whatever the scheme checks, such as the type of system being replaced or whether the customer owns the home, put those questions in the quote form so you aren’t quoting jobs that won’t qualify.
- Links to the official scheme page. This builds trust and lets the customer check the current rules themselves.
- Shows the call button high on mobile. Most hot water searches happen when the old unit has already failed or is about to. People want to talk to someone.
Keep one page per scheme rather than one page per state with every scheme on it. When a scheme changes, you update one page and one ad group, not a page that half your campaigns depend on.
If your current pages weren’t built for paid traffic, look at how we approach landing pages for paid ads. For a plumber, the page and the ad group should always be planned together, which is how we run Google Ads for plumbing businesses.
Frequently asked questions
Should I mention the rebate amount in my hot water ads? We’d leave it out of headlines. Amounts depend on the system, the property and the scheme rules at the time, and they change. A figure that’s wrong for the customer leads to an awkward quote. Explain on the landing page how the rebate is applied, and link to the official scheme page.
I only work in Victoria. Do I still need separate ad groups? Yes. Solar Homes and VEU are different programs with different rules, and people search for them by name. Separate ad groups let you match the ad and page to the program they typed, and let you see which one produces jobs.
What about customers who just search “heat pump hot water rebate” with no state? Your state campaign’s location targeting already decides where the ad shows. Put those searches in a general rebate ad group within each state campaign, and send them to a page that covers the federal STCs plus the state options that apply there.
Can I run one ad group for both heat pump and solar hot water rebate searches? You can, but we’d split them. Someone searching for a solar hot water rebate plumber is often considering a different system, and roof space and orientation questions come up. A separate ad group and page let you speak to that directly.
What happens to my ads if a state scheme closes or changes? Pause or rewrite that scheme’s ad group and update its landing page the same week. Because each scheme has its own ad group and page, a change doesn’t affect the rest of the account. This is why the review dates in the checklist matter.
Will Google reject ads that mention government programs? Naming a program you install under is generally fine. What causes trouble is wording that suggests you are the government or an official body. Keep the copy clear that you are an independent plumbing business.
Your next step
This week, open your Google Ads search terms report for hot water and sort the last few months of searches by state and scheme name. If you see Victorian scheme searches landing in a campaign that shows NSW pricing, or the other way round, that is the first campaign to split.
If you’d like us to look at it with you, Chat with us on WhatsApp.