folder_open Paid Search

Roofing LSAs move into Performance Max: what to export first

Martin Marinov Martin Marinov
10 min read
Topics google-adslocal-services-adsperformance-maxroofinglead-tracking

If you run Local Services Ads for your roofing company, download your lead history before Google moves you, because that history does not come with you. Google began the local services ads performance max migration for pay-per-lead goals in August 2026, and roofing is in the first wave. When your account migrates, the old LSA dashboard stops. Your past leads, charges and disputes stay behind.

The new setup also works differently. Your per-job max cost per lead becomes one target CPA for the whole campaign. Your weekly budget becomes a daily budget. If you just accept the defaults, a cheap leak repair and a full tear-off get treated the same.

Here is how we handle it for roofers. Export everything after the 14-day notice arrives. Split campaigns by job value. Keep judging the account on what a signed roof costs you, not what a lead costs you.

What changes on your local services ads performance max migration day

You probably know the LSA dashboard well. You see each lead, listen to calls if recording is on, mark jobs as booked, and dispute leads that were spam or outside your service area. That screen is your record of what Google charged you and why.

On migration day, that view goes away. The new campaign starts fresh. Google’s bidding has to learn again, and you lose the easy side-by-side view of this year against last year.

Three changes matter most for a roofer:

  • History does not carry over. Lead lists, charged and credited leads, and your notes on each one stay in the old system. If you did not save them, you cannot compare before and after.
  • Bids become one target. In LSA you could set different max costs per lead for different job types. In Performance Max you set a target cost per acquisition (target CPA) at the campaign level. Google then tries to get conversions at that average cost.
  • Budgets go daily. LSA used a weekly budget. Performance Max uses an average daily budget. Google can spend more on some days and less on others, but it aims to stay within your daily average over the month.

The daily budget matters most for roofers after a storm. With a weekly budget, a hail event could use up the week by Tuesday. With a daily budget, the money is spread out differently. You need to choose whether to raise the budget when storms hit or keep it steady.

Your local services ads history export: what to pull before the dashboard goes dark

Do this as soon as the notice lands. Do not wait for the last day. If something fails to download, you want time to try again or ask Google support.

  1. Download the full lead report for every date range the dashboard allows. Pick the longest range you can, and save one file per year if it splits them.
  2. Note which leads were charged, credited or disputed. This shows your true cost per lead after credits, which is the number your new target CPA has to beat.
  3. Save call recordings for leads that turned into jobs, if you had recording on. These show which job types and which neighborhoods bring real roofs.
  4. Write down your current settings. That means job types you turned on, service area ZIP codes or cities, business hours, max cost per lead for each job type, and weekly budget. Take screenshots of each screen.
  5. Match each lead to your CRM or job list. Next to each lead, write the outcome: no answer, estimate given, signed, lost, or not a fit. If you did repair work, write repair. If you sold a replacement, write replacement.
  6. Save your reviews and your Google Guaranteed or license details in one folder, so you have them if anything needs to be checked again during setup.
  7. Store it all in one shared folder that your office manager and whoever runs your ads can both open.

Step 5 is the most important one. A lead file by itself only tells you what Google charged. Once you match it to your job list, it tells you what your marketing actually earned. That matched file is what you set your new targets from.

Pay per lead Performance Max: turning many bids into one target

In LSA, you might have been willing to pay more for a roof replacement lead than for a gutter or small repair lead. Performance Max does not work that way inside one campaign. You give it one target CPA, and it chases the cheapest conversions it can find near that number.

That is a problem for roofers. Small repair calls are usually easier and cheaper to get than replacement inquiries. One campaign with one target will drift toward whatever converts cheapest. You end up with more leads, a lower cost per lead on paper, and fewer big jobs.

To set a realistic starting target, use your exported history:

  • Find what you actually paid per lead after credits, split by job type.
  • Find how many of those leads became signed work.
  • Start the new target near what you were really paying, not lower. Starting too low can choke spend while the campaign is still learning.

Give the campaign time before you change the target. Every big change restarts some of the learning. We usually wait until it has steady conversion data before making adjustments, and then we change the target in small steps.

If you want to check whether your daily budget leaves room for the bidding to work, our Google Ads budget calculator helps you work backward from the number of jobs you want.

LSA migration roofing setup: split repair and replacement before Google blends them

This is the biggest choice in the whole migration. Do not let repair and replacement share one campaign and one target.

We build at least two campaigns for roofers:

A repair and service campaign

This covers leaks, storm patches, missing shingles, flashing and inspections. These jobs are smaller and often urgent. The target CPA can be lower. The budget can be modest but steady, with room to raise it after storms.

A replacement campaign

This covers full tear-offs, re-roofs, and material upgrades like metal or tile, if you do them. These leads are worth far more to you, so the target CPA can be higher. The ads, landing page and offer should speak to homeowners comparing quotes, not to someone with water coming through the ceiling.

Why it works: each campaign gets its own target and budget, so Google is not choosing between them for you. You decide how much of your money goes to big jobs.

Some things to keep separate between the two:

  • Landing pages. A repair page should push “call now.” A replacement page should explain the process, financing if you offer it, warranties and your license and insurance details. If you need pages built for this, see our high-converting landing pages.
  • Conversion goals. Pick one primary conversion per lead, a qualified call or a form fill. That is the action the campaign bids and bills on. Track booked estimates and signed jobs as secondary or offline conversions so Google learns job quality without counting the same homeowner twice. Mark which campaign each lead came from.
  • Tracking links. Tag every link so the lead shows up in your CRM with the right campaign name. Our UTM link builder makes this quick.

If you also do commercial roofing, give it its own campaign. Commercial buyers search, call and decide differently from homeowners.

Keep judging on cost per signed roof, not cost per lead

LSA trained a lot of roofers to watch cost per lead. Performance Max will show you a lower cost per lead almost right away, because it is good at finding cheap conversions. That number can look great while your sales calendar gets thinner.

The number to watch is cost per signed roof. Add up what you spent on the campaign over a period, then divide by the jobs you signed from it. Do this separately for repair and replacement.

To get there, the signed job has to connect back to the ad that started it. That means:

  • Every call is tracked with a number that shows which campaign it came from.
  • Every form and call lands in your CRM with the campaign attached.
  • When a job is signed, someone marks it in the CRM.
  • Ideally, booked estimates and signed jobs are sent back to Google Ads as secondary offline conversions or as conversion values tied to the original lead. The lead stays the only primary conversion, so the homeowner is counted once while the bidding learns what a real roof looks like.

That last step is what keeps Performance Max from chasing tire-kickers. Once Google knows which leads became contracts, it can start finding more people like them, and you are not paying for the same homeowner a second time when they sign. We set this up through offline conversion tracking that connects your CRM to your ad account.

Compare your new cost per signed roof against the history you exported. That is the only fair before-and-after test, and it is why the export matters so much. If you want us to run the migration and the tracking for you, here is how we handle Google Ads for roofing companies.

Frequently asked questions

Can I still dispute bad leads after my roofing LSAs move into Performance Max? The LSA dispute process belonged to the old dashboard. In Performance Max you pay for the results the campaign is built around, and the way you protect yourself is through tight conversion settings, negative signals and good tracking. Dispute any open LSA leads before migration day, while the old dashboard still works.

Will my Google Guaranteed badge and reviews disappear? Your reviews live on your Google Business Profile, which is separate from the ad campaign, so moving to Performance Max does not remove them. For the badge, check your 14-day notice for how Google Guaranteed status is shown after migration, and ask Google support if the notice is unclear. Save a record of your guarantee and license details beforehand either way, then check how your business appears in the new ads once they are live.

Should I raise my budget when a hail or wind storm hits? Often yes, but do it on purpose. With a daily budget, storm demand will not use up a week of spend in a day the way it could with a weekly budget. Raise the repair campaign budget for the storm period, keep an eye on cost per signed job, and bring it back down when calls slow.

What if I only do repairs, not replacements? Then split by job type in another way, such as emergency leak calls versus scheduled inspections, or residential versus commercial. The point is the same: give jobs with different value their own target so Google does not blend them.

How long before I can tell if the new campaigns are working? Lead numbers show up fast, but signed roofs take longer because replacement sales take time to close. Judge repair campaigns sooner and replacement campaigns later, and always against your exported LSA history, not against the first week’s cost per lead.

Your next step

This week, open your LSA dashboard, download the longest lead report it allows, and start matching each lead to your job list as repair, replacement, signed or lost. If you want help planning the split and the tracking before your notice arrives, Call us+1 (415) 420-4059 or start with our free marketing audit.