Most Singapore interior design firms cannot say which lead source actually produces signed contracts. Qanvast sends inquiries, your Google and Meta ads send inquiries, past clients refer friends, and they all end up in the same WhatsApp chats and inbox. By the time a homeowner signs, nobody remembers where they first came from.
The fix is simple interior design lead tracking. Tag every lead with its source the moment it arrives. Carry that tag through every stage in your CRM until the contract is signed. Then divide what you spent on each channel by the contracts it produced.
This guide walks you through that setup in the order you would build it. You do not need new software to start. You need one field, a few rules your team actually follows, and a monthly habit of reading the numbers.
Where your leads come from, and where the source gets lost
A typical Singapore ID firm has four or five real lead sources:
- Qanvast, where homeowners browse portfolios and send inquiries to firms
- Google Ads, from people searching things like “HDB BTO interior design” or “condo renovation package”
- Meta Ads on Facebook and Instagram, often with Instant Forms or a button that opens WhatsApp
- Organic search, Google Business Profile and Instagram posts
- Referrals from past clients, property agents or contractors you work with
The source usually disappears in one of three places.
The first is WhatsApp. A homeowner sees your project on Qanvast, finds your number on your Instagram, and messages you directly. To your team, it looks like a “WhatsApp lead.” The real source was Qanvast.
The second is the handover. Your sales coordinator takes the first message, then passes the lead to a designer for the site visit. The designer never asks where it came from, and the coordinator never wrote it down.
The third is time. Say a BTO owner contacts you months before key collection. By the time they sign, the original ad or listing that brought them in has long been forgotten.
If the source is not recorded in the first conversation, you will almost never recover it later.
Interior design lead tracking starts with one source field
Before you touch any ads settings, decide on a single “Lead source” field in your CRM or spreadsheet. If you do not have a renovation CRM in Singapore yet, a shared spreadsheet works for the first few months. HubSpot, Pipedrive or Zoho CRM will all handle this once you outgrow it.
Make it a dropdown, not free text. Free text gives you “qanvast,” “Qanvast portal,” “QV” and “from website?” all meaning different things. A fixed list could look like this:
- Qanvast
- Google Ads
- Meta Ads
- Google search / Maps (organic)
- Instagram (organic)
- Referral - past client
- Referral - agent or partner
- Walk-in / showroom
- Unknown
Keep “Unknown” on the list. It is honest, and watching it shrink tells you whether your team is following the process.
Add a second field called “Source detail” for the specifics: which Google campaign, which Meta ad, which past client referred them. This is what lets you later say “referrals from our Punggol clients sign more often” instead of just “referrals work.”
Then add the fields that matter for contracts: property type (HDB resale, BTO, condo, landed, commercial), expected key collection or start date, quoted amount and signed contract value.
Capture the source the moment the lead arrives
This is the part your web person and your front-line staff do together. Here is the setup in the order we would build it:
- Give every channel its own entry point. Use a separate WhatsApp click-to-chat link with a different prefilled message for your website, your Meta ads and your Instagram bio. For example, the ad link opens with “Hi, I saw your ad and want a quote,” while the website link says “Hi, I’m inquiring from your website.” Your team can then see the source in the first message.
- Tag every link with UTM parameters. Any link you control, from Google Ads, Meta Ads, Instagram bio or email, should carry UTM tags so your analytics shows where visitors came from. Our free UTM link builder keeps the naming consistent so “meta” and “Facebook” do not split into two sources.
- Pass the source into your website form. Add hidden fields to your contact form that pick up the UTM values and the Google click ID (gclid) from the page URL. When the form is submitted, the source lands in the CRM record automatically, with no guessing.
- Log Qanvast inquiries as Qanvast, every time. However Qanvast notifies you of a new inquiry, the coordinator creates the CRM record and sets the source to Qanvast before replying. Copy the homeowner’s message and property details into the notes.
- Ask one question in the first reply. For any lead where the source is unclear, ask “How did you first hear about us?” and offer the same options as your dropdown. Homeowners answer this happily when it is asked early and casually.
- Do not let a lead move stages without a source. Make the source field required in your CRM, or check in your weekly sales meeting that no lead past “Site visit booked” still says Unknown.
The rule that matters most: the first person who touches the lead records the source. Not the designer three weeks later.
Carry the source from first message to signed contract
Renovation sales take several steps, and leads drop out at each one. Set up your pipeline stages to match how you actually sell:
- New inquiry
- Qualified (budget, property type and timeline fit)
- Site visit or measurement done
- Design proposal and quotation sent
- Contract signed
- Lost (with a reason)
The source tag stays on the record the whole way through. That is what lets you see more than just lead counts.
For example, you may find Meta Ads bring plenty of new inquiries, but many drop off before the site visit because they were only browsing. Qanvast leads may arrive with clearer budgets and more of them reach quotation. Referrals may be few, but sign at a high rate. None of this shows up if you only count inquiries.
Record a lost reason too: chose another firm, budget too low, project postponed, no response. If one channel keeps losing on budget, that tells you to change the targeting or the offer, not to cut the channel blindly.
If your designers work from their own phones and WhatsApp, agree on one rule: the stage gets updated in the CRM the same day something changes. A pipeline that is two weeks out of date will give you the wrong answer.
When your stages and sources are clean, you can also send signed contracts back to Google Ads and Meta so the platforms learn which clicks turn into real projects. Our ads-to-CRM attribution setup covers how that works. It only pays off once the basic tagging above is working.
Work out cost per contract and interior design marketing ROI
Once you have a few months of tagged leads, sit down once a month and build a simple table, one row per channel:
- Spend: what you paid for that channel in the period. For Qanvast, whatever you pay them. For ads, the spend from Google Ads and Meta Ads Manager. For referrals, any referral fees or gifts you give.
- Inquiries: leads tagged with that source.
- Site visits: how many reached that stage.
- Signed contracts: how many signed.
- Contract value: the total value of those signed contracts.
Cost per contract is spend divided by signed contracts. Revenue per dollar spent is contract value divided by spend. These two numbers are your real interior design marketing ROI, and they often tell a different story than cost per lead.
Compare by inquiry month, not signing month
Renovation leads take time to sign. A homeowner who contacted you in March might sign in June after getting their keys. If you compare June spend against June contracts, you will credit the wrong month.
Instead, group leads by the month they first inquired, and track how many of each month’s leads eventually sign. It takes patience, but it is the only fair comparison when Qanvast leads and ad leads move at different speeds.
Compare like with like
A landed home renovation and a BTO package are different jobs. If one channel brings mostly condo owners and another brings mostly BTO couples, compare contract value, not just contract count. A channel with a higher cost per contract can still be your best channel if its projects are bigger.
When the table is done, the decisions get easier. Put more budget into the channel with the best return on contract value. Fix the drop-off stage on the channel that brings volume but does not sign. And stop paying for the channel that never converts, whichever it turns out to be.
If you want help setting this up in your CRM from day one, see how we handle CRM integration for interior design firms.
Frequently asked questions
How do I track Qanvast leads that message us on WhatsApp instead of through the platform? Ask every new WhatsApp lead how they first found you, and include Qanvast as one of the options. Many homeowners browse your Qanvast profile, then contact you directly. If you only tag platform inquiries as Qanvast, you will undercount it.
Should Qanvast leads and ad leads go into the same CRM pipeline? Yes. Use one pipeline with a source field rather than separate pipelines per channel. That way your stages, lost reasons and contract values line up, and you can compare channels side by side.
What if a homeowner saw us on Qanvast, then clicked our Google ad, then got referred by a friend? Record the first source in the main field and note the others in “Source detail.” For a small firm, first source is the simplest rule to follow consistently. Decide on one rule and stick to it so your monthly numbers stay comparable.
Do we need a paid renovation CRM in Singapore to do this? No. A well-structured shared spreadsheet with a source dropdown and stage columns is enough to start. Move to a CRM when you have several designers updating leads, or when you want signed contracts sent back to Google Ads and Meta automatically.
Is it OK to store homeowner details from Qanvast and WhatsApp in our CRM? You can keep the details needed to follow up on their renovation inquiry, but handle them in line with Singapore’s PDPA. Limit access to staff who need it, and do not add people to marketing broadcasts without their consent.
How long before the cost per contract numbers are useful? You need enough leads in each channel to have reached the signing stage. For most firms that means waiting at least a few months after you start tagging. Early on, watch site visit rates by channel, since those show trends sooner.
Your next step
This week, add a required “Lead source” dropdown to your CRM or spreadsheet, go back through every open lead, and fill in the source for each one, asking the homeowner if you have to. That single list will already show you where your active projects really came from. If you would like us to build the full tracking setup from Qanvast and ads through to signed contracts, Chat with us on WhatsApp