Analytics for General Contractors in Singapore
A remodel can take months to travel from first call to signed contract, so numbers that stop at the click say very little. Analytics follows each bid request through the walkthrough, the estimate and the signature, and ties the result back to the search or ad that started it. You see which sources bring projects, not just phone calls.
For residential and commercial general contractors who want to know which marketing brings signed projects, with call, form and bid tracking and a monthly report in plain language.
What a general contractor needs to measure
Context from how your customers search, compare and book.
A general contractor sells a project, not a visit. A homeowner might call about a kitchen remodel, a second-floor addition or a fire rebuild, while a clinic owner asks about a tenant improvement. Each request starts as a call or a form, but its value only shows after a walkthrough, an estimate and often a long wait for plans or permits.
Because the cycle is slow, many marketing reports mislead. A source that sends plenty of calls may send small repair jobs, and a source that sends few may send the one addition that pays for the quarter. Without tracking that reaches the signed contract, you may cut the channel that works best.
Calls matter most here. Owners often phone the first three builders they find and book whoever answers and sounds sure of the work. Call tracking numbers show which page or ad each call came from, how long it lasted and whether anyone picked up, so a missed call from a promising remodel is visible rather than lost.
Honest limits apply. Referrals, yard signs and portal leads sit outside the picture unless you record them, and some callers use a number from a truck door and cannot be traced to any ad. Analytics shows what can be shown, labels the rest as unknown, and never forces a guess into a report.
Who this analytics work suits
groups Customer segments
- person Residential contractors running kitchen, bath, addition and fire rebuild projects with long quote cycles
- person Commercial contractors bidding offices, clinics and tenant improvements through several decision makers
- person Design-build firms that want proof that earlier conversations turn into signed scopes
- person Family-run firms weighing paid search, local listings, referrals and lead portals side by side
psychology What drives their decision
- check_circle A single record from first call to signed contract
- check_circle Cost per bid request and cost per signed project
- check_circle Separate numbers for homeowner and commercial work
- check_circle Reports an owner or estimator can read in minutes
How we deliver Analytics
A clear, repeatable process built around how general contractors customers search and decide.
Agree what counts
We sit down with you and your estimator and agree the events that matter: a bid request, a booked walkthrough, an estimate sent, a signed contract and a deposit. Homeowner and commercial work get separate definitions, because a clinic fit-out and a bathroom remodel move at different speeds and carry different value.
Set up call tracking
We place tracking numbers on search, ads, the business profile and key project pages, with call notes or recordings if you allow them. Each call is logged with its source, length and whether someone answered. Your main number stays on trucks, signs and printed estimates.
Connect forms and plan uploads
Bid forms, plan upload forms and photo submissions are tagged with their source and fire a clear event when sent. Test submissions confirm each one reaches the estimator inbox and the report. Broken forms, a common silent leak, get fixed before any spend is judged.
Record outcomes after the walkthrough
A simple routine closes the loop. When a bid is won, lost or dropped, someone marks it in your record system or a shared sheet. We match those outcomes to the original source so that spend can be read against signed work instead of first contact.
Report and adjust each month
Each month you receive a short written report covering requests, walkthroughs, bids and signed projects by source and by type of work. We point out what looks odd, what we suggest moving and what is still too early to judge, then agree changes with you.
What General Contractors Analytics includes
See which channels bring real enquiries and new customers in Singapore
- check_circle Call, form and plan upload tracking
- check_circle Outcome marking from bid to signature
- check_circle Monthly report in plain language
- check_circle Separate residential and commercial views
- check_circle Offline results returned to ad accounts
What you can expect
- verified You can see which sources bring signed projects, not only phone calls
- verified Missed calls and broken bid forms are found before they cost a project
- verified Residential and commercial results stay apart instead of blending into one average
- verified Spend decisions rest on cost per signed project rather than cost per click
- verified Estimators know where each request came from before they pick up the phone
- verified Reports admit what cannot be traced instead of guessing
Deliverables you receive
Technical approach
The mechanics behind Analytics for general contractors, explained plainly.
Call tracking that fits long cycles
Numbers swap by source on the site so each call is tied to a page or ad. Because a bid can close months later, we keep call and form records long enough to match them to a signed contract, instead of judging a source after a few weeks.
Keeping homeowner and commercial apart
Events carry a project type, so a bathroom remodel and a tenant improvement never blur into one average. Commercial bid invitations received by email or phone are added by hand, with the building type and rough size, so they sit beside online requests.
Offline results back to ad accounts
Where your volume allows it, signed projects are sent back to the ad accounts as results, so the systems learn from real contracts rather than clicks. We upload only what you approve, strip personal details beyond what the platform needs, and explain what is shared.
Marketing from $500 USD a month
Month to month, no commitment. One fee covers the pages, the search and ad work and the tracking. Ad spend is separate and stays in your own accounts.
Starting at
$500 USD per month
Free to cancel with 1 month's notice. Tell us what you sell and where. We come back with what the first month would fix.
Get a Free AuditWhat $500 a month covers
Measurement stack review
IncludedAnalytics, tag manager, ad pixels and call tracking are inspected together to see which tools disagree and why.
Written tracking plan
IncludedBusiness goals translate into a documented list of actions worth measuring, with owners and naming conventions agreed.
Consent-aware collection
IncludedCookie banner choices are honoured across tools, helping keep data gathering in line with privacy rules.
Ad platform conversions
IncludedConversions pass into ad accounts and get checked until platform figures sit close to real results.
What to expect from analytics
Tracking can be set up quickly, but meaning arrives slowly, because projects close slowly. Early reports show activity, and later ones show signed work.
We agree event definitions, place tracking numbers, test every form and check that calls and submissions reach the right people. You get a short list of leaks to fix, such as unanswered after-hours calls or a plan upload that fails on phones.
First reports show requests and walkthroughs by source. Outcomes start to be marked on bids, and the report begins to separate residential from commercial. Numbers are still thin, so we say clearly what they can and cannot tell you.
Signed projects accumulate, and cost per signed project becomes readable by source and by type of work. We suggest where to spend more or less. We do not promise results, and long projects may take longer to show up.
Other General Contractors marketing services
Our team
The same people on the audit and on the work
Elmer owns your measurement stack, from the written tracking plan and consent-aware collection to ad platform conversions, so reporting rests on revenue-quality data.
-
Martin
Founder, strategy and audits
Writes every audit and takes every first call. On your account from day one, running growth for SMEs since 2010.
-
Yoana
Social and app development
Shapes social strategy and builds practical app experiences that turn attention into action.
-
Leads this workElmer
Analytics
Connects tracking, attribution and reporting so decisions are based on revenue-quality data.
-
Mike
SEO
Owns technical, local and content SEO so the right buyers find you when demand is highest.
-
Robert
Paid media
Plans and manages paid search and social campaigns around qualified leads.
-
Dino
Design
Creates clear brand and conversion-focused design across landing pages, campaigns and product experiences.
Certified and experienced
Certified where it matters. Accountable for the outcome.
Verified platform knowledge, 25+ years of hands-on experience, and an operating track record since 2010.
Frequently Asked Questions
How can a general contractor track a project that takes months to close? expand_more
What counts as a conversion for general contractors? expand_more
Can you track calls that come from truck signs and referrals? expand_more
Do we need a customer record system before starting analytics? expand_more
Will tracking slow down a general contractor's website? expand_more
How are bids from lead portals handled? expand_more
What do we see each month, and do you promise results? expand_more
Ready to get more from General Contractors Analytics?
Get a free audit and we will show you where you are losing enquiries today.
Get a Free Audit arrow_forward
Reviewed by
Martin Marinov
Founder, HeyLead
Martin founded HeyLead and has worked in SEO and paid search for more than 20 years, across Google Ads, Microsoft Ads and organic search.