From the week of 1 December 2026, Google will no longer let you switch Display off at campaign level in Demand Gen. The control moves down into each ad group. If you run Demand Gen on YouTube, Discover and Gmail to fill your winter diary, Demand Gen display targeting is now something you manage ad group by ad group, not with one tick box for the whole campaign.
For most UK trade accounts, nothing breaks on the day. But the next campaign you build, or the next one your ads person copies, can start showing on the Display Network without anyone choosing that. Display placements are often where trade budgets drift into clicks that never become a phone call.
Below we cover what Google has said, which accounts it touches, and the checks to do before the change lands.
What Google is changing in Demand Gen display targeting
Here is what Google confirmed in its developer announcement on Demand Gen display targeting changes, which we checked on 9 November 2026:
- From the week of 1 December 2026, the campaign-level Display setting for new Demand Gen campaigns defaults to on.
- Trying to set Display to off at campaign level will return an error.
- Display targeting is then controlled only through ad group channel controls or channel strategy.
- Existing campaigns that were opted out of Display are moved to ad group-level opt-outs.
- Display-only ad groups are paused.
- Google says serving behavior does not change for these existing campaigns.
That is the full extent of the change. We are not going to guess at anything Google has not said.
In plain terms, the off switch has not gone. It has moved. Your Google Display Network opt-out now lives inside every ad group, and that is where you need to look.
Which UK trade accounts this touches
This matters most if you run Demand Gen to reach homeowners before they search. Plenty of plumbers, heating engineers, roofers, electricians and window fitters use YouTube ads for trades in autumn and winter. A short video on boiler servicing or storm damage repairs can put your name in front of local homeowners before the first cold snap.
Many of those accounts were set up with Display switched off on purpose. The aim was simple: show on YouTube, in Discover and in Gmail, and keep the ads off the wider network of third-party websites and apps.
You are affected if any of these apply:
- You plan to launch a new Demand Gen campaign after the change. Display will be on by default, so you need to switch it off in each ad group.
- You or your agency copy campaigns as templates. A copy made after the change behaves like a new campaign. Do not assume the old opt-out comes with it.
- You had Display-only ad groups. Google says these get paused. If one of them was doing a real job, you need to know it has stopped.
- Several people touch the account. If a freelancer, an in-house marketer and you all make edits, the risk of one new ad group going live with Display on goes up.
If you only run Search campaigns or Performance Max, this specific change does not apply to you. If you run Demand Gen, it does.
The ad group check to do before 1 December
Do this once now, while things are quiet. Then do it again in the first week of December, after Google moves existing campaigns over. It should take less than an hour for a typical trade account.
- List every Demand Gen campaign in the account. Include paused ones you might switch back on for January. A paused campaign from last winter is exactly the kind that gets reactivated or copied in a hurry.
- Open each ad group and find the channel controls. This is where you choose which Google surfaces the ad group can show on, such as YouTube, Discover, Gmail and Display. Write down what each one is set to today.
- Mark which ad groups should never show on Display. For most trades, that is all of them. If you have a deliberate reason to use Display, note it next to that ad group so nobody “fixes” it later.
- Note any Display-only ad groups. These will be paused. Decide now whether that is fine or whether the job they did needs to move somewhere else.
- Check again in the week of 1 December. Confirm that the campaigns you had opted out now show Display off in every ad group, as Google says they will. Trust it, but check.
- Write a one-line rule for anyone building campaigns. Something like: “Every new Demand Gen ad group: Display off unless Martin approves it.” Put it where your team or agency will see it.
- Add a placement check to your monthly routine. Look at where your ads actually showed, not just what the settings say. More on that below.
None of this needs a developer. Whoever runs your Google Ads account can do it. If that person is you, block out a morning.
Building new winter campaigns after the switch
The bigger risk is not your old campaigns. It is the one you build in a rush in December, when a cold week fills the phones and you want more of it.
Say you launch a new campaign for “emergency boiler repair” the day after a frost warning. You set the budget, upload the video, pick your audience and go live. If you never open the channel controls, Display stays on. Your ad can start showing on websites and apps that have nothing to do with heating, to people who will never book a repair.
When you set up a new Demand Gen campaign after the change:
- Expect Display to be on. Do not try to fix it at campaign level. Google says that will return an error.
- Go into every ad group before you publish. Set the Demand Gen channel controls to the surfaces you actually want. For most trades, that means YouTube, and maybe Discover and Gmail.
- Watch for channel strategy options. Google says Display can also be controlled through channel strategy. If the setup screen offers you a choice about which channels to use, read it properly instead of clicking past it.
- Check each new ad group separately. If you add a second ad group for a different service, such as power flushing next to boiler repair, check its channel controls too. Each ad group carries its own setting.
A good habit is to build one clean ad group with the controls set correctly, then duplicate within that campaign and check that the setting carried over. Do not assume it did.
How to tell if Display is eating your winter budget
Settings tell you what should happen. Your reports tell you what did happen. Here is what to look at once a month, and weekly during your busy season.
Look at where your ads showed
Google Ads can show you the placements where your ads appeared. Scan the list. YouTube channels and videos are expected. A long tail of mobile games, random apps or websites with no link to home improvement is a sign Display has crept in somewhere.
If you find placements you never want, you can exclude them. But the real fix is the channel controls in the ad group, not chasing bad placements one at a time.
Compare clicks against real inquiries
This is where most trade accounts fall down. A Display placement can bring cheap clicks that look fine in Google Ads but never turn into a call, a quote request or a WhatsApp message.
If you are not tracking what happens after the click, you cannot tell good traffic from bad. Our conversion tracking setup service exists for exactly this. Calls, form fills and WhatsApp taps should all count as conversions so you can see which channel brings real jobs.
For a quick check you can do yourself, tag the links in your Demand Gen ads with our free UTM link builder. Then the visits show up clearly in your analytics, and you can see whether those visitors actually look at your quote page.
Watch your spend pacing
If a Demand Gen campaign suddenly spends its daily budget much earlier in the day than it used to, find out why. A newly opened channel is one possible cause. Before you raise the budget for winter, our free Google Ads budget calculator helps you work out a sensible figure for the number of jobs you want, so you are not just topping up a leak.
If you would rather hand this over, our Google Ads management for trades and service businesses includes these channel checks as part of the regular routine.
Frequently asked questions
My Demand Gen campaign already has Display switched off. Do I need to do anything?
Google says existing campaigns that were opted out move to ad group-level opt-outs, and that serving behavior does not change. So you should not need to change anything. We would still check each ad group in the week of 1 December to confirm the setting moved over as expected, especially before your busiest weeks.
Why would Google pause my Display-only ad groups?
Google’s announcement says Display-only ad groups are paused as part of the change, but it does not give a reason we can pass on. What matters for you is whether one of those ad groups was bringing in work. If it was, plan where that activity should live now, rather than finding out in January that it quietly stopped.
I copied last winter’s campaign to reuse it. Is the old opt-out still there?
Do not assume so. A campaign created after the change is a new campaign, and Google says new campaigns have Display on by default. Open every ad group in the copy and check the channel controls before you let it run.
Is Display always bad for a local trade business?
Not always, but for most of the plumbers, roofers and electricians we work with, it is not where their best inquiries come from. YouTube, Discover and Gmail tend to suit a short trade video better. If you want to test Display, do it in its own ad group with its own small budget and proper tracking, so it cannot drag down the rest of the campaign.
Does this change affect my Search ads or Local Services Ads?
No. Google’s announcement is about Demand Gen campaigns only. Your Search campaigns and any other campaign types are not part of this change.
Who should make these changes, me or my web person?
Whoever manages your Google Ads account. This is not a website job. Your web person only comes in if you also need call or form tracking fixed so you can see which channel is actually producing jobs.
Your next step
This week, open every Demand Gen campaign in your account, go into each ad group, and write down whether Display is on or off. Then put a reminder in your calendar for the week of 1 December to check it again. If you would like us to look over your account before the busy season starts, Chat with us on WhatsApp.