Most heat pump installers running Google Ads in the UK pay for clicks from people researching the Boiler Upgrade Scheme, and many of them will never book a survey. Some aren’t eligible. Some are a year away from replacing their boiler. Some just want to know how the grant works before they decide anything.
The fix is not a bigger budget. As a boiler upgrade scheme installer, you need to keep grant research and install intent in separate keyword groups, check eligibility on the landing page before anyone books, and count survey bookings as your real result instead of form fills.
This post covers how we set that up for heat pump installers.
Grant research and install intent are two different searches
Someone typing “boiler upgrade scheme eligibility” and someone typing “air source heat pump installer near me” both care about the grant. Only the second one is shopping for an installer.
Grant research searches tend to look like this:
- how does the boiler upgrade scheme work
- boiler upgrade scheme eligibility
- how to apply for boiler upgrade scheme
- is the heat pump grant ending
- free heat pump scheme
Install intent searches look different:
- air source heat pump installers [town]
- heat pump installation quote
- mcs certified heat pump installer near me
- boiler upgrade scheme installer [county]
- replace oil boiler with heat pump
The research crowd is useful later, but they are expensive when they land on a page built to book surveys. They read, leave, and your campaign learns that heat pump grant leads are hard to get. Then it bids higher to find more of the same people.
Because the installer applies for the voucher with Ofgem on the homeowner’s behalf, many people searching about the grant don’t yet realize they need to pick an installer first. That gap is your opening, but only when the search shows they are ready to pick one.
Splitting keywords so a boiler upgrade scheme installer pays for buyers
We build air source heat pump Google Ads accounts with at least two clearly separated parts. One handles install intent and gets most of the budget. The other is optional and handles research, with a tight cap.
The install campaign
This campaign targets searches that include an action or a location: install, installer, quote, cost to fit, near me, a town name, or a switch from a specific fuel like oil or LPG. Use phrase and exact match here so you control which searches you pay for. If you use broad match, pair it with a strong negative keyword list and check the search terms report every week.
Searches that mention the grant and an installer belong here too. “bus voucher installer” or “boiler upgrade scheme installer near me” shows someone who already knows the scheme and is now choosing who to call. Those are the best bus voucher installer PPC terms in the account.
The research campaign (or none at all)
You have two sensible choices for grant research searches:
- Block them completely with negative keywords and let your website content pick them up through search.
- Run a small separate campaign that sends them to a plain-English guide page, with a low daily cap, and don’t count guide visits as leads.
Option two works for installers with the patience to follow up with people over several months. Option one is cleaner for most.
Negative keywords that protect the install campaign
Start with a list like this and adjust it to what your search terms report shows:
- how does
- how to apply
- eligibility (test this one, as some ready buyers include it)
- ofgem
- news
- ending
- scotland
- northern ireland
- council
- free
- eco4
- tenant
- rented
- jobs
- training
- course
The scheme covers properties in England and Wales, so searches mentioning Scotland or Northern Ireland usually waste money unless you also offer full-price installs there. Set your location targeting to reach people in or regularly in your service area, not people who have only shown interest in it. That one setting stops a lot of out-of-area clicks.
Ads that set expectations before the click
Your ad text can filter people before you pay for them. If the ad says only “Get your heat pump grant,” you will attract everyone curious about free money. If it says who you serve and what happens next, the wrong people skip it.
Useful lines for heat pump ads:
- MCS certified installer covering [area]
- We handle the Boiler Upgrade Scheme application for you
- For homeowners in England and Wales replacing gas, oil or LPG
- Book a home survey online
Avoid promising a fixed grant amount or a specific final price in the ad. Grant rules change over time, and a promise in an ad that doesn’t match the quote damages trust at the survey.
Use call assets during the hours someone can actually answer the phone. A heat pump buyer who calls and gets voicemail on the first try often calls the next installer. If calls go unanswered in the evening, schedule the call asset for working hours only and let the form handle the rest.
A landing page that qualifies Boiler Upgrade Scheme eligibility
This is where most installers lose money. The ad brings in a good visitor, then the page asks for a name, phone number and “tell us about your project.” You get a pile of inquiries, and half your week goes on calls with people who rent, live outside the area or already have a heat pump.
Put a short eligibility check before the booking step. Keep it to a few taps on a phone:
- Do you own the property? (Yes / No, I rent / I’m a landlord)
- Is it in England or Wales?
- What heats the home now? (Gas, oil, LPG, electric, already a heat pump, other)
- Is it a new build?
- Does the property have a valid EPC? (Yes / No / Not sure)
- Postcode
Then route people based on their answers:
- Likely eligible and in your area: show a survey booking calendar straight away.
- Not sure about the EPC: let them book, and explain that you will check it before the survey.
- Renting: explain that the property owner needs to apply and offer a short note they can forward to their landlord.
- Outside the scheme or outside your area: offer a full-price quote or a guide, without hiding the reason.
Nobody gets a dead end, and your calendar fills with people you can actually quote. The page should also state in plain words that you are MCS certified and that you handle the voucher application. That answers the two questions grant-aware buyers care about most.
If you want help building that kind of page and the campaign behind it, our Google Ads service for heat pump installers covers both.
Tracking survey bookings instead of form fills
Google Ads learns from whatever you tell it counts as a conversion. If every form submission counts, it hunts for more form submissions, including the ineligible ones. If only survey bookings count, it hunts for people like the ones who booked.
Here is the setup we use, and your web person can follow it:
- Create a conversion action for “survey booked.” Fire it on the booking confirmation page or the booking tool’s confirmation event, not on the page that loads the calendar.
- Mark it as the primary conversion. Set form submissions and guide downloads as secondary conversion actions so they show in reports but don’t steer bidding.
- Track phone calls with a minimum call length. Google Ads lets you count a call only after it lasts a set time, which filters out quick hang-ups and wrong numbers.
- Capture the click ID on every form and booking. Add a hidden field that stores the GCLID from the landing page URL, so each booking in your CRM or spreadsheet carries the ad click that produced it.
- Import what happens after the survey. Upload survey completed, quote sent and install sold back into Google Ads as offline conversions. We explain the process in our guide to offline conversion tracking.
- Tag any non-Google links. If you also send people to the same page from email or social posts, use the UTM link builder so those visits don’t get mixed up with paid search.
Once installs start flowing back, you can see which keywords bring sold jobs, not just which bring clicks. Usually a handful of town-plus-installer searches carry the account, and some grant-heavy terms that looked busy produce nothing.
Setting a budget around surveys you can handle
Heat pump surveys take time, and your diary has a limit. There is no point paying for more booked surveys than your surveyors can attend in a reasonable time. A buyer who waits too long for a visit often signs with someone else.
Work backward from your capacity. Decide how many surveys you can do in a week, then set the budget to aim for that number, with room for no-shows. The Google Ads budget calculator helps you sanity-check the spend against the leads you want.
Season matters too. Search interest in heating usually picks up as the weather turns cold, and people with failing boilers want answers fast. If you plan to grow in autumn and winter, raise the budget on the install campaign only, never on the research side.
Frequently asked questions
Should I bid on “boiler upgrade scheme” on its own?
Usually not in the install campaign. The bare phrase draws people learning how the grant works, not people choosing an installer. If you want that traffic, put it in a separate low-cap campaign that leads to a guide page, and keep it out of your survey numbers.
What if someone fails the eligibility check but still wants a heat pump?
Offer them a full-price quote. Some homeowners outside the scheme still want to switch, for example people who already had grant support or properties that don’t qualify. The check isn’t about turning people away. It sends each visitor to the right next step.
Will an eligibility form put off good leads?
Not if it’s short and tappable. Buyers who are ready to switch already expect to be asked who owns the home and what heats it now. A few quick questions before booking feels like progress to them. It only hurts when the form is long, asks for typing on a phone, or hides why you are asking.
Can I target landlords with these ads?
Yes, if you serve them. Property owners, including landlords, can apply through the scheme, so landlords can be good customers. Write a separate ad group and landing section for them, because their questions about tenants, access and timing differ from a homeowner’s.
How do I know which keywords bring sold installs and not just surveys?
Store the click ID with every booking, then upload sold jobs back into Google Ads as offline conversions. After a few weeks of uploads, you can compare keywords by installs instead of clicks or bookings.
Should I mention the grant amount in my ads?
We advise against fixed figures. Scheme details can change, and a number in an ad that no longer matches the quote creates an awkward conversation at the survey. Say that you handle the application and explain current support on the landing page, where it’s easy to update.
Your next step
This week, open your search terms report for the last 30 days and sort the searches into two piles: grant research and install intent. Add the research terms you don’t want as negatives, and check that your survey booking confirmation, not the form, is your primary conversion.
If you’d like us to look over the account or the landing page with you, Chat with us on WhatsApp.